K.EM-50 Foredom Chisel 50c Handpiece & Table Top Control +11-Chisels Woodcarving

Description

FOREDOM
®
SPEED CONTROL & CHISEL HANDPIECE
TABLE TOP VARIABLE SPEED CONTROL EM-1 CHISEL HANDPIECE WITH 11 CHISELS
Made by FOREDOM  K.EM-50
Kit K.EM-50 is for use with Series SR, S, CC, and other 'universal motors' with a standard key tip shaft.
Kit includes C.EM-1 Dial Speed Control, along with H.50 Chisel Handpiece and the following 11 Chisels: A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, A-KC510, A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511.
-
Foredom’s 50C Chisel Handpiece
gives a power assist to carving in all types of wood, plastic, plaster and soft carving stone. The H.50 is a reciprocating ‘hammer’ type handpiece that requires a light pressure to engage the hammering chisel action.
Shaped
like the popular H.44T, it has a unique, rugged textured plastic barrel and tapered aluminum tip.
.
NOTE:
Need to use this with a Flexshaft.
Handpiece attaches to a Foredom or other Brand  flex shaft with a standard key tip shaft.  Will not Work without a Flexshaft
The Chisel Handpiece is recommended for use with the 1/6 HP SR Series, 1/3 TX  Series motors or other flex shaft with a
standard key tip shaft in forward rotation only.
For optimum performance use between 1,000 – 8,000 rpm.
JETS Product # 0618-50C
-
Foredom’s  C.EM-1 Dial Variable Speed Control
is a table top manually controlled speed control, constructed of heavy duty plastic with durable solid state electronics. It has a dial control for precise speed settings, as well as good repeatability of previous settings.
The use of this dial speed control is highly recommended when working with the chisel handpiece, in place of the more common foot pedal.
The Dial Speed Control will run at a steady speed within the recommended speed range. Carvers can set and maintain any desired speed when connected to a dial control.
JETS Product # 0620-3015
--- Kit K.EM-50 is for use with Series SR, S, CC, and other 'universal motors' with a standard key tip shaft.
-
DESCRIPTION
:
JETS Product # 0620-3150
Made In USA
by Foredom
®
# K.EM-50
-
-
50C Chisel Handpiece:
Length  6"-150mm  - 1"- 25.4mm  Diameter
-
Chisels :
11 Pieces Included –
Chisels:
A-KC503, A-KC504, A-KC505, A-KC506, A-KC509, A-KC510, A-KC501, A-KC502, A-KC507, A-KC508, and A-KC511.
-
EM-1 Variable Speed Control:
5" Long - 5-3/4" Width - 2-5/8" Height
-
Compatible:
Standard Key Tip Shaft
-
Control Voltage:
1.5 Amps  -  115Volt  -  60 Hz
-
Interchangeable:
Foredom's C.FCT-1 and C.SCT-1 Controls
Shipping: Via USPS MAIL
Domestic via Priority Mail
®
Please visit
JETSTOOLS
our ebay Store for many more Foredom Tools and Accessories along with many more Tools and Supplies for Jewelry Making, Woodworking and Wood Carving, Hobby and Craft and a selection of other
J
ewelers
E
quipment
T
ools
S
upplies.
JETSInc.
CKSP RBA 2.9LZ  614  Z
P